2014/06/27

2014 June 27

2014 June 27    Still raining still cold. The mountains have snow on them

Plenty of trains running :D
Have a major problem with Tam Valley Servo point control, awaiting on answer from them.
And running trains in both directions, crosses etc. Its becoming much more like a railway, day by day!

But now I have the other end to fix. That is trains all eventually arrive back at "Bowser" and terminate, because I need to get the branch up and running again . Show my plans next time :)

Here is a question I posted on DCC Downunder. Would appreciate advice?

Has anybody got an Explorer?
I have a three car early version Southern Models Explorer to which I want to add sound.
As you might know the lead driving car is powered and the trailing one a dummy. When you reverse the headlights and tail lights swap ends as you would expect. But the sound only comes out of the motorised end car. When a long 3 car Explorer passes you it is obvious that the two trailing cars are shut down
How to fix? Well I got 4 cell phone speakers arranged in series and two pairs in parallel returning the load to 8 ohms as required, and hard wired the speakers into the three cars. Two in middle and one each in the ends.
It works!! But the volume is so low that I had to build a small amplifier to boost the signal. That really does not work, and I need a big amp and the space is not there. Plus it is becoming an expensive proposition.
In fact at $415 it is probably cheaper to buy a two car set and use the motor to double power the 3 car unit.
Having said that I will need to operate two speakers in series (?) create a 4 ohm load and as before supply a speaker in front and a second in middle motor and the same from other end.
I presume that I will need to permanently assign the two Loksound V4.0 decoders to an address and lock them after tweaking the CV's.

Now what about the lighting? I guess do not use the second Loksound lighting at all. Wire up the second motor the same as the original dummy, and hope that the car lights all respond as the original set using the dummy. . That is headlights changing ends and marker lights rear lights and saloon lights?
Am I missing anything?
Cheers
Rod